Leave Your Message
SDPO-IP 12kW Off Grid Hybrid Inverter(Split)
SDPO Off Grid Hybrid Inverter(Split)
Products Categories
Featured Products

SDPO-IP 12kW Off Grid Hybrid Inverter(Split)

* Lithium communication
* Photovoltaic+ mains charging
* Eight major protection functions
* Pure sine wave output

    Product Introduction

    The SDPO-IP Split phase standard off grid hybrid inverter combines photovoltaic and mains charging and discharging, UPS bypass, and battery inversion functions. It can intelligently adjust the work priority, communicate with home lithium batteries, and can also increase output power through multiple sets of parallel machines. It can output split phase 120V/240V voltage, which is suitable for different application scenarios in the Americas, such as homes, RV, agriculture, and industry.

    Product features

    1. Advanced SPWM technology, pure sine wave output
    2. Automatic activation of lithium batteries
    3. Three output modes: photovoltaic, inverter, and mains bypass
    4. Four charging modes including photovoltaic, mains, photovoltaic priority, and hybrid charging
    5. Advanced MPPT technology with an efficiency of up to 99.9%

    Product Connection Diagram

    Product Connection Diagram

    Product Parameters

    Model SDPO-IP-12kW Split
    AC/Generator input
    Rated input voltage 120Vac(L1/N,L2/N)/240Vac(L1/L2)
    Voltage range (85Vac~140Vac)±2%
    Frequency 50Hz/60Hz(Auto detection)
    Inverted output
    Rated power Split phase 12000W;single-phase 7200W
    (limited by the wiring terminals)
    Output voltage 120Vac(L1/N,L2/N)/240Vac(L1/L2)
    Waveform Pure sine wave
    Switching time (adjustable) 10ms(typical)
    Peak power Split phase 18000W;
    single-phase 18000W
    Battery
    Battery type Lithium ion batteries/lead-acid batteries
    Rated battery voltage 51.2V(Minimum starting voltage 44V)
    Battery voltage range 40~58.6Vdc
    PV input
    PV charging meth MPPT
    PV maximum input power 6000W+6000W
    Maximum PV Input urrent 22A+22A
    MPPT tracking range 90-450VDC
    Maximum PV charging current(can be set) 220A
    Maximum AC charging current 160A
    Maximum total charging current 220A
    Basic parameters
    Communication interface USB/RS485(/WiFi/GPRS)/Dry node control
    Parallel interface Maximum of 6 parallel machines(optional)
    Product size(mm) 620*450*132
    Product size(mm) 768*564*234
    NW.(kg) 24.3
    GW.(kg) 27.45